Page 24
Join-A-Jig
™
User Manual
Creating Wood Joints
Creating a butt joint
Butt joints are commonly used when making frames and cabinets .
Frames are made on a flat plane and include a horizontal rail into which the
pocket-holes are drilled . These are connected to a vertical piece called a
style .
Follow these instructions to make a butt joint .
Step
Action
1
Drill at least two pocket-holes on the back of the rail to make
sure the joint will not twist .
2
Clamp the joint .
3
Use the Square Drive to drive in the screws.
Note:
The Drill Guide lets you drill two pocket holes at the same time,
without having to move your workpiece .
Summary of Contents for Join-A-Jig
Page 1: ...INSTRUCTION MANUAL...
Page 2: ......
