Page 14
Join-A-Jig
™
User Manual
Using the Join-A-Jig
™
Setting the Depth Collar
For optimal joint strength you need to set your Join-A-Jig
™
Depth Collar so
that the pocket holes are drilled at the correct depth for your workpiece .
Setting the correct drill depth means that the self-tapping screw will exit at
the centre of the first workpiece.
Follow the instructions below to set the maximum plunge depth of the Step
Drill Bit using the Depth Collar .
Step
Action
1
Loosen the Depth Collar using the Allen Key .
2
Align the tip of the Step Drill Bit with the measurement on
the Depth Setting Gauge that best matches the thickness of
the workpiece .
3
Fasten the Depth Collar using the Allen Key .
Example:
For a 35mm workpiece align the Step Drill Bit tip with the 35mm
mark on the Depth Setting Gauge .
Adjust to size
Depth Collar
Summary of Contents for Join-A-Jig
Page 1: ...INSTRUCTION MANUAL...
Page 2: ......
