Page 22
Join-A-Jig
™
User Manual
Using the Join-A-Jig
™
Using a spacer block
The Drill Guide is set to centre a screw in 16mm - 19mm material . The Drill
Guide also comes with a 5mm spacer block (already attached) to centre a
screw in 20mm - 23mm material . You will need to make your own spacer
blocks to compensate for thicker material .
If your workpiece is… Then…
16mm - 19mm
No spacer blocks are required.
20mm – 23mm
Attach the 5mm spacer block supplied to the
bottom of the Drill Guide .
Note:
When new, this is already attached .
24mm and up
Create your own spacer block . As a general rule
use a 5mm spacer block to compensate for each
5mm increase in workpiece thickness .
Call our Customer Service Team on 0800 002 999 in New Zealand, 1800
890 840 in Australia, or 1800 200 3111 in United States for information
about ordering Join-A-Jig
™
spacer blocks .
Drill Guide
Spacer Blocks
Summary of Contents for Join-A-Jig
Page 1: ...INSTRUCTION MANUAL...
Page 2: ......
