6 Maintenance And Adjustment
6.3 Adjusting the Print Line
The Print Line must be adjusted so it is positioned parallel to the paper feed roller.
1. To move the Print Head forward (Direction A)
turn the Adjustment Wheel counterclockwise ( arrow 1).
2. To move the Print Head rearward (Direction B)
turn the Adjustment Wheel clockwise ( arrow 2).
6.4 Clearing Cutter Jams
Paper can jam the Cutter during use. Please follow the below steps to clean the paper jam.
A Phillips head screw for clearing cutter jams is located on the bottom of cutter module, as shown below.
1. Turn the Printer OFF.
2. Use a Philips screwdriver to turn the screw and clear the jam.
3. Once you have cleared the paper jam, turn the Printer back ON. The cutter will automatically reset.
39
Turn the Adjustment Wheel
Direction-A
Direction-B
PRINT HEAD
ADJUSTMENT WHEEL
=
Labels should be at least 30 mm high to ensure proper functioning of the cutter.
NOTICE
PHILLIPS HEAD SCREW
1
2
