2 Printer Setup
15
Windows Drivers are NOT needed when printing to your Tharo Printer with EASYLABEL.
If you want to print to your Tharo Printer from other Windows applications then a Windows driver is needed.
STOP!
Do NOT plug the Printer's USB cable into your computer yet. There are some special installation steps for
Windows 8 and 10 users. If you are NOT using Windows 8 or 10 you can skip to the next page.
To install the Printer driver in Windows 8 or 10:
1. Open the "Tharo_Driver_Win8_Win10" folder.
2. Right Click on thr.inf and select "install"
3. Click on “Yes”
4. When the install finishes, Click on “OK”
5. Then plug the Printer's USB cable into your computer.
The printer should now be ready for use in Windows 8 or 10.
If you plugged in the printer without doing the above steps first, the printer is installed as an "Other Device"
and you will have to install the driver this way:
1. Open the Windows Control Panel
2. Click on "Hardware and Sound"
3. Under "Devices and Printers" heading click on "Device Manager"
4. Expand "Other Devices"
5. Right-click on the Tharo Printer and select "Update Driver Software"
6. Select "Browse my computer for driver software"
7. Click “Browse” and browse to where the "Tharo_Driver_Win8_Win10" folder and then click on “Next”
8. Click on “Install”
9. Click on “Close” to exit the wizard
The printer should now be ready for use in Windows 8 or 10.
Insert the product CD into CD/DVD drive of your computer.
2.9
Windows Driver Installation
