manualshive.com logo in svg

Thales payShield 10K, Installation And User Manual

The Thales payShield 10K is a cutting-edge device for secure payments. Its Installation And User Manual provides comprehensive instructions on setup and usage. Download the manual for free from manualshive.com to unlock the full potential of this advanced payment solution.

Share
Download
background image

payShield 10K Installation and User Guide

payShield 10K Installation and User Guide

© Thales Group 

Page 2

All Rights Reserved

2.1.12.2  Transitioning non-supported legacy HSM Smart Cards . . . . . . . . . . . . . . . .  2-33
2.1.12.3  Copying a card at the console  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-33
2.1.13  User Documentation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-33

3  Physical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-35

3.1  Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-35
3.1.1  Key locks and keys  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-35
3.1.1.1  Changing the HSM state via the key locks . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-35
3.1.2  Smart Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36
3.1.3  Front panel LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-36
3.1.3.1  Health LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-37
3.1.3.2  Service LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-37
3.1.3.3   Tamper LED  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-38
3.1.3.4  Boot-up LED Sequence  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-38
3.1.3.5  Blue LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-38
3.1.4  Air Inlets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-38
3.2  Rear panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-39
3.2.1  AC/DC power supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-39
3.2.1.1  Swapping out the Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-39
3.2.2  Fan trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-40
3.2.3  Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-40
3.2.4  AC Power on/off switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-41
3.2.5  PCIe card interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-41
3.2.6  Ethernet ports  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-41
3.2.7  USB Type A port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-41
3.2.8  Erase Button and LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-41
3.2.9  Ground Lug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-41

4  Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-43

4.1  Pre-installation tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-43
4.1.1  Mechanical and Electrical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-43
4.1.1.1  Physical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-43
4.1.1.2  Power Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-43
4.1.1.3  Environmental Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-44
4.1.1.4   Battery consideration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-44
4.2  Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-44

5  payShield 10K 10G Ethernet Hardware Platform Variant. . . . . . . . . . . . . . . . . .  5-49

5.1  Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-49
5.2  Rear Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-50
5.3  General Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-50
5.4  Installing 10Gb ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-50
5.5  Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5-51

6  payShield Management Options  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6-53

7  Commission using payShield Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-55

7.1  Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-55
7.2  Prerequisites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-55
7.3  Preparing for Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-55
7.3.1  Configuring payShield 10K for Static IP (if required) . . . . . . . . . . . . . . . . . . . . .  7-55
7.3.2  Install Smart Card Reader Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-56
7.3.3  Check the Proxy Configuration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-56
7.3.4  Configure DNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-56

Summary of Contents for payShield 10K























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for payShield 10K

H3C SR6600 Series Faq preview
SR6600 Series
Brand: H3C Pages: 22
H3C S5800-60C-PWR Ordering Manual preview
S5800-60C-PWR
Brand: H3C Pages: 3
Aruba IntroSpect Analyzer 2 Series Quick Start Manual preview
IntroSpect Analyzer 2 Series
Brand: Aruba Pages: 5
Juniper MX2010 Hardware Manual preview
MX2010
Brand: Juniper Pages: 825
Paradyne Hotwire 8343 Installation Instructions Manual preview
Hotwire 8343
Brand: Paradyne Pages: 6
Hunter Pro-C Series Programming Instructions preview
Pro-C Series
Brand: Hunter Pages: 2
BinTec BIANCA/BRI Getting Started preview
BIANCA/BRI
Brand: BinTec Pages: 34
ADTRAN NetVanta Serial Dial Backup Interface Module (DIM) none Quick Start Manual preview
NetVanta Serial Dial Backup Interface Module (DIM) none
Brand: ADTRAN Pages: 2
Hama 49062 Instruction Manual preview
49062
Brand: Hama Pages: 24
NETGEAR RBRE960B User Manual preview
RBRE960B
Brand: NETGEAR Pages: 152
Juniper LN1000 - RELEASE NOTES 8-27-2010 User Manual preview
LN1000 - RELEASE NOTES 8-27-2010
Brand: Juniper Pages: 64
NETGEAR ReadyNAS Duo v2 Software Manual preview
ReadyNAS Duo v2
Brand: NETGEAR Pages: 100
IEI Technology PUZZLE-5030 User Manual preview
PUZZLE-5030
Brand: IEI Technology Pages: 119
Panduit CDPP8RG-S Installation Instructions preview
CDPP8RG-S
Brand: Panduit Pages: 5
ICP DAS USA ZT-2005-C8 User Manual preview
ZT-2005-C8
Brand: ICP DAS USA Pages: 60
TCL UC11 Quick Start Manual preview
UC11
Brand: TCL Pages: 38
TCL HH40L1 User Manual preview
HH40L1
Brand: TCL Pages: 23
SMC Networks Barricade g SMC2804WBRP-G Quick Installation Manual preview
Barricade g SMC2804WBRP-G
Brand: SMC Networks Pages: 53

Brands by name

Popular brands

Load more brands