payShield 10K Installation and User Guide
©Thales Group
Page 406
All Rights Reserved
Change a Smartcard PIN (NP)
Variant
Key Block
Online
Offline
Secure
Authorization:
Not required
Command:
NP
Function:
To select a new PIN for a smartcard (RACCs and RLMKs are supported)
without changing any of the other details stored on the card.
The old PIN must be submitted before a change is effected and the new PIN
must be supplied correctly at two consecutive prompts.
Authorization:
The HSM does not require any authorization to run this command.
Inputs:
•
Smartcard PIN: 5 to 8 alphanumeric characters. PINs must be entered
within 60 seconds of being requested.
Outputs:
•
Text messages:
o
Insert Card and press ENTER.
o
Enter current PIN.
o
Enter new PIN for smartcard.
o
Re-enter new PIN.
o
PIN change completed.
Errors:
•
Card not formatted - card not formatted
•
Not a LMK card - card is not formatted for LMK or key storage.
•
Smartcard error; command/return: 0003 - an invalid PIN was entered.
•
Invalid PIN; re-enter - PIN is fewer than 5 or greater than 8 digits.
•
PINs did not agree - the new PINs entered for the smartcard did not match.
Example:
Online>
NP
<Return>
Insert card and press ENTER:
<Return>
Enter current PIN:
****
<Return>
Enter new PIN for smartcard:
****
<Return>
Re-enter new PIN:
****
<Return>
PINs did not agree
Enter new PIN for smartcard:
****
<Return>
Re-enter new PIN:
****
<Return>
PIN change completed
Online>