payShield 10K Installation and User Guide
payShield 10K Installation and User Guide
© Thales Group
Page 66
All Rights Reserved
You are returned to the landing page.
7.5 Commissioning payShield 10K
This section describes the steps required to complete the commissioning of the payShield 10K ready for LMK
eneration / LMK installation and configuration.
Table 3
Commissioning Checklist
Step
Task
Go to Section
DONE
1.
Load a Security Domain:
•
Install an existing security domain.
This can be a payShield 9000 domain.
OR:
•
Create a new security domain.
•
Section 7.5.3, “Load the Security
Domain”, on page 73
•
Section 7.5.2, “Create a new
Security Domain”, on page 68
2.
Set the HSM Recovery Key (HRK) passphrases.
Section 7.5.4, “Set HSM Recovery
Key (HRK) passphrases”, on page
78
3.
Create left and right key RACCs.
Section 7.5.5, “Create Left and Right
Remote Access Control key cards”,
on page 79
4.
Create your trusted officers/authorizing officers.
