Textron RANSOMES FRONT-LINE 933, Operator Instructions Manual

Page: 36 / 84

GB-F-NL-34
12. Be sure hoses do not rub on tractor when
raising or lowering cutter decks.
13. Make sure all tractor and cutterdeck tire
pressures are set to 14 psi. (1 kg/cm 2 ). Tires
may be overinflated for shipping.
14. Check battery electrolyte level and charge. Use
protective equipment such as, but not limited to,
goggles, face shield, rubber gloves, and apron.
15. Before starting the machine:
– Fill the fuel tank with Diesel fuel.
–
Check and top up the engine sump with
engine oil if needed.
–
Check and top up the radiator with a 50%
antifreeze solution if needed.
– Check and top up the hydraulic system with
oil.
–
Check all points for lubrication (refer to the
lubrication section in this manual).
– Acquaint yourself with the instructions at the
beginning of this manual, paying particular
attention to the control and operation
sections.
GB
Fig.14
Fig.13