Textron RANSOMES FRONT-LINE 933, Operator Instructions Manual

Page: 24 / 84

GB-F-NL-22
Fig.4
Fig.5
Fig.6
GB
FORWARD/REVERSE FOOTPEDAL (Fig.4)
Using the right foot push down the upper part of the
pedal for forward running and the rear part for
reverse. Ground speed is increased the further the
pedal is depressed. The pedal is spring controlled
and will automatically return to the neutral position
when the foot pressure is removed. To improve
operator comfort in the reverse mode, Pedal Adaptor
G can be detached by removing (2) hex head
capscrews.
NOTES:
– Neutral latch (B) must be pushed in for the
forward/reverse footpedal to work.
– Neutral latch (B) must not be pushed during
engine starting or the machine will not start.
BRAKE PEDAL (Fig.5)
To engage the parking brake use the left foot to
push forward on the brake pedal until it locks in
place. To release the parking brake place the ball of
the foot on the pedal and use the heel to step down
on the latch M.
IMPLEMENT LIFT CONTROL (Fig.6)
To raise a cutter deck, pull back on the lever and
hold until deck is raised. To lower, push lever
forward and hold until deck is lowered. The lever will
automatically return to neutral postition when
released.