27
DHB MPE850 MAR Rev B | 408014 | 408090 | 408101 | 408246 |
5 Troubleshooting with trouble codes
5.2 Description of trouble codes
Trouble code
Displayed fault
Trouble code description
Possible consequences
Affected part/system
►
Possible consequences/remedy
P0262
Cylinder 1 Injector Circuit High
Short circuit to plus at part or wire harness.
Engine does not start.
Rough engine running.
Injector 1st cylinder
►
Check wiring in the wire harness to the
affected part. (See chapter 7 Wiring
diagram.)
►
Replace the affected part. (See the repair
manual.)
P0264
Cylinder 2 Injector Circuit Low
Short circuit to ground at part or wire harness.
Engine does not start.
Rough engine running.
Injector 2nd cylinder
►
Check wiring in the wire harness to the
affected part. (See chapter 7 Wiring
diagram.)
►
Replace the affected part. (See the repair
manual.)
P0265
Cylinder 2 Injector Circuit High
Short circuit to plus at part or wire harness.
Engine does not start.
Rough engine running.
Injector 2nd cylinder
►
Check wiring in the wire harness to the
affected part. (See chapter 7 Wiring
diagram.)
►
Replace the affected part. (See the repair
manual.)
P0315
Crankshaft Position System Variation Not
Learned
The sensor crankshaft signal is undetermined.
Engine does not start.
Sensor crankshaft
►
Check wiring in the wire harness to the
affected part. (See chapter 7 Wiring
diagram.)
►
Replace the affected part. (See the repair
manual.)
►
Check the crankshaft reluctor. (See
chapter 6 Test procedures at engine.)
P0336
Crankshaft Position Sensor "A" Circuit Range/
Performance
No signal at the sensor crankshaft.
Engine does not start.
Sensor crankshaft
►
Check wiring in the wire harness to the
affected part. (See chapter 7 Wiring
diagram.)
►
Replace the affected part. (See the repair
manual.)
Summary of Contents for 408014
Page 2: ......