28
DHB MPE850 MAR Rev B | 408014 | 408090 | 408101 | 408246 |
5 Troubleshooting with trouble codes
5.2 Description of trouble codes
Trouble code
Displayed fault
Trouble code description
Possible consequences
Affected part/system
►
Possible consequences/remedy
P0341
Camshaft Position Sensor "A" Circuit Range/
Performance Bank 1 or Single Sensor
No signal at the sensor camshaft.
The engine speed is limited.
Sensor camshaft
►
Check wiring in the wire harness to the
affected part. (See chapter 7 Wiring
diagram.)
►
Replace the affected part. (See the repair
manual.)
P0344
Camshaft Position Sensor "A" Circuit
Intermittent Bank 1 or Single Sensor
During operation implausible signals occur at
the sensor camshaft.
Sensor camshaft
►
Check if the affected part is unusually dirty.
►
Check the cam spike at rocker arm. (See
chapter 6 Test procedures at engine.)
►
Check wiring in the wire harness to the
affected part. (See chapter 7 Wiring
diagram.)
►
Replace the affected part. (See the repair
manual.)
P0351
Ignition Coil "A" Primary/Secondary Circuit
Open circuit or short circuit to ground at part or
wire harness.
Rough engine running.
Engine does not start or stalls.
Ignition coil 1st cylinder
►
Check wiring in the wire harness to the
affected part. (See chapter 7 Wiring
diagram.)
►
Replace the affected part. (See the repair
manual.)
P0352
Ignition Coil "B" Primary/Secondary Circuit
Open circuit or short circuit to ground at part or
wire harness.
Rough engine running.
Engine does not start or stalls.
Ignition coil 2nd cylinder
►
Check wiring in the wire harness to the
affected part. (See chapter 7 Wiring
diagram.)
►
Replace the affected part. (See the repair
manual.)
Summary of Contents for 408014
Page 2: ......