36
Texi 1501 TS Computerized Embroidery Machine Operation Manual
Part 18 System Information
In the main menu interface, press
key to enter into system information
interface menu.
18.1 System Number and Version Information Checking
It is used to check the system number and version information of the control system.
In the system information interface, press
key to check.
18.2 System Update
It is used to update the software version of control system.
In the system information interface menu, press
key to start update operation.
Make the update operation according to prompts. During the update process do not power off.
The update is completed in about 3 minutes, and the system is advanced to the main operation
interface automatically.
Updates may clear current embroidery file. Please complete current embroidery before you
update.
Shortcuts to update program. After the machine is powered up and displays “1.INIT USB
OK”, press
key twice and press
key twice immediately. The upper part of
display displays a prompt dialogue: “Update software, Start Key Update, Stop Key Exit.” Press
“start” key to update and “stop” key to exit.
Shortcut updates map depot operation after the machine powered on and displays “1.INIT
USB OK” press
key for three times immediately. The upper part of display displays a
prompt dialogue: “Update picture, Start Key Update, Stop Key Exit.” Press “start” key to
update and “stop” key to exit.
