25
Texi 1501 TS Computerized Embroidery Machine Operation Manual
In the hoop origin interface, press
key to select operation. The interface will pop
up a dialogue “Please confirm the limit switch is in normal operation.” Press
key to
start absolute origin searching. After searching is completed, the hoop will return to the stop point
before searching automatically.
After the absolute point is searched, the operation is always valid if the hoop has not moved
after power failure.
8.3 Set Software Limits
This function is only valid when the hoop setting is set in “Other”.
In hoop origin interface, press
key to select operation. The interface pops up a
dialogue “Move hoop to left top” According to the prompt move hoop to left upper corner, press
key. The interface pops up another dialogue “Move hoop to right bottom” According
to the prompt move hoop to right bottom corner, press
key and the setting is
completed.
Cancel software limit: after entering to software limit interface, don’t move the hoop
and press key twice continuously. It will cancel the software limit.
