20
Texi 1501 TS Computerized Embroidery Machine Operation Manual
Part 5 On Board Lettering
In the machine operation interface, press
key to enter into letter interface, as
in the following Fig 8:
Figure 8 On Board Lettering
Press any letter key to select required letters or other signs. Press
key to switch
upper-case and lower-case letters. Press
key to clear letter. After entering is completed,
press
key to see the lettering setting interface (operation cannot be continued if
embroidery is operation mode), as in the following Fig 9.
Figure 9 Lettering Parameters Settings
