PART 1 CONTROL SYSTEM
1
1.1 SYSTEM OVERVIEW
1
1.2 PRECAUTIONS
1
1.3 WORKING ENVIRONMENT
2
1.4 SYSTEM POWER SUPPLY AND GROUNDING
2
1.5 OPERATION PANEL AND KEY FUNCTION
2
1.5-1 Key Function Introduction
2
1.5-2 Icons Description of Touch Keys
2
1.5-3 Function
4
PART 2 EMBROIDERY DESIGN INPUT OPERATION
5
2.1 INPUT USB DRIVE DESIGN TO MEMORY
5
2.2 DELETE DESIGNS IN EMBROIDERY DESIGN MANAGEMENT
6
PART 3 SELECTING DESIGN IN EMBROIDERY DESIGN MANAGEMENT
7
3.1 SELECT EMBROIDERY DESIGN FOR EMBROIDERING
7
3.2 DELETE SINGLE EMBROIDERY DESIGN
8
3.3 OUTPUT EMBROIDERY DESIGN TO USB DRIVE
8
PART 4 EMBROIDERY DESIGN
9
4.1 EMBROIDERY STATUS MODE
9
4.2 PREPARATION STATUS
10
4.2-1 Set Embroidery Design Parameters
10
4.2-2 Switching Hoops
11
4.3 OPERATION STATUS
12
4.3-1 Embroidery Design Origin Setting (Starting Point)
12
4.3-2 Offset Point Setting (Highest Point of Hoop Center)
12
4.3-3 Return to Origin (Starting Point)
12
4.3-4 Offset Operation
13
4.3-5 Return to Stop Point
13
4.3-6 Set Color Changing Setting
13
4.3-6-1 Set Color Changing Sequence
14
4.3-6-2 Appliqué Offset, Low Speed Embroidering and Needle Bar
Replacement
14
4.3-6-3 Sequin Design
15
4.3-7 Change Color Sequence Mode
15
4.3-8 Embroidering Float Mode Switching
16
4.3-9 Embroidery Design Trace Operation
17
4.3-10 Returning to Embroidery Origin Point after Power Failure
17
TABLE OF CONTENTS
