10
Texi 1501 TS Computerized Embroidery Machine Operation Manual
In operation status, press
key and a pop up appears “Remove embroidery status”.
Press
key to enter into preparation status, as in figure 3.
4.2 Preparation Status
In preparation status, it can do main axis origin return, trimming, hoop switching, manual
color changing, embroidery design parameter setting and embroidery design selection and other
operations.
4.2-1 Set Embroidery Design Parameters
In preparation status, press
key to enter embroidery design parameter setting
operation i.e. Design Set, as in the following Fig. 5
Figure 5 Design Set
Modify values according to the embroidery design. After modification is completed, press
key to save modification. Press
key to return to main interface.
Parameter Range Description:
X/Y direction magnification power: 50%-200%
Rotation directions: total of 8 type of directions, i.e. default 0°, 90°, 180°, 270°, 0°mirror,
90°mirror, 180°mirror and 270°mirror
Rotation angle: 0-89° (the angle is calculated after rotation direction)
X/Y repetition number: 1-99
