33
4 --
(Margin)
Shunt, 100-mil, Black
(Initial
Placement Across Pins (1,2) (4,5)
(7,8) (10,11) (13,14) of connector
J4)
0.100 929950-00
3M
11
TP5, TP6, TP7,
TP8, TP9, TP10,
TP11, TP15,
TP16, TP17,
TP18
5012
Test Point, White, Thru Hole
0.125 x
0.125
5012 Keystone
1 U1
TPS40100RGE
IC, Midrange Input Synchronous
Buck Controller
QFN-24 TPS40100RGE
TI
1
--
PCB, 3.25 In x 3.0 In x 0.062 In
EVM
Any
Notes:
1. These assemblies are ESD sensitive, ESD precautions shall be observed.
2. These assemblies must be clean and free from flux and all contaminants.
Use of no clean flux is not acceptable.
3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4. Ref designators marked with an asterisk ('**') cannot be substituted.
All other components can be substituted with equivalent MFG's components.
Table 3: TPS40100EVM-001 Bill of Materials
Summary of Contents for TPS40100
