Quick Start
Figure 16. DES Adjust Panel
Set DES Mode time skew
– This slider adjusts the time skew between the falling edge sampling clock
relative to the rising edge sampling clock in DES mode. Adjustment can be done using the computer
mouse/pointer, or using left/right arrow keys once the slider has been selected. Although the time skew is
entered in 8 bit (0 to 127) relative form, it is also displayed in approximate fs.
Note: No changes will take effect until the
Write Reg
button is clicked.
t
AD
Adjust: This tab controls the Aperture Delay function.
19
SNAU146 – September 2013
ADC1xDxxxx(RF)RB Reference Board
Copyright © 2013, Texas Instruments Incorporated