Texas Instruments ADC1 D (RF )RB Series, User Manual, Page: 12 / 34

Quick Start
www.ti.com
2 - Save Plot
Displays the Plot Save dialog (this button is only active when the plot contains one or more channels with
data).
3 - Reset Zoom
Reset X and Y axis zoom to 100%.
4 - Clear
Clear data from all channels.
5 - Print
Print the plot.
6 - Time Domain
Display the plot as time domain data.
7 - FFT
Display the plot as an FFT
8 – Histogram
Display a histogram of the data.
9 - Close
Close this plot.
2.5.3 Right Panels – Signal Source
Figure 9. WaveVision 5 main window command buttons
Open the Signal Source panel on the right side of the window and confirm that the ADC1xDxxxx(RF)RB is
available and confirm that it is selected. There are seven possible modes of operation selectable here:
• NonDES I ch – Dual channel mode capturing and viewing the I-channel data
• NonDES Q ch – Dual channel mode capturing and viewing the Q-channel data
• NonDES I and Q – Dual channel mode capturing and viewing both the I- and Q-channel data
• • DESI Mode – Double Edge Sample (interleaved) mode with I input
12 ADC1xDxxxx(RF)RB Reference Board SNAU146 – September 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated