Quick Start
Figure 14. Cal Adjust Panel
•
CSS
– Skip or include Rtrim calibration. When the Rtrim has been completed once, it is not necessary
to do it again until the device is power cycled.
•
SSC
– Calibration control via the SPI, i.e. not the pin-controlled option for calibration.
Note:
No changes will take effect until the
Write Config Reg
button is clicked.
I-channel:
This tab changes the sign and the magnitude of the offset and the full scale range settings.
17
SNAU146 – September 2013
ADC1xDxxxx(RF)RB Reference Board
Copyright © 2013, Texas Instruments Incorporated