Texas Instruments -84 Plus, Manual Book

Page: 458 / 696

Chapter 16: Programming 455
By default, the TI-84 Plus uses the USB port if it is connected. If the USB cable is not
connected, it uses the I/O port. If you want to specify either the USB or I/O port, use the
following portflag numbers:
portflag
=0 use USB port if connected;
portflag
=1 use USB port;
portflag
=2 use I/O port
Note: GetCalc(
does not work between TI
.
82 and TI-83 Plus or a TI
.
82 and TI-84 Plus
calculators.
Get(, Send( Get(, Send( Get(, Send( Get(, Send(
Get(
gets data from the CBL 2™ or CBR™ and stores it to
variable
on the receiving TI-84
Plus.
variable
can be a real number, list element, list name, matrix element, matrix name,
string, Y= variable, graph database, or picture.
Get( variable )
Note:
If you transfer a program that references the
Get(
command to the TI-84 Plus from
a TI
.
82, the TI-84 Plus will interpret it as the
Get(
described above. Use
GetCalc(
to get
data from another TI-84 Plus.
Send(
sends the contents of
variable
to the CBL 2™ or CBR™. You cannot use it to send
to another TI-84 Plus.
variable
can be a real number, list element, list name, matrix
element, matrix name, string, Y= variable, graph database, or picture.
variable
can be a
list of elements.