Texas Instruments -84 Plus Manual Book Download Page 293

Page: 293 / 696

Chapter 12: Statistics

290

Press

… Í

to display the stat list editor.

Press

}

to move the cursor to the top line.

Press

, if necessary, to move the cursor onto the list name to which you want

to attach the formula.

Note:

If a formula in quotation marks is displayed on the entry line, then a formula is

already attached to the list name. To edit the formula, press

, and then edit the

formula.

Press

, enter the formula, and press

Note:

If you do not use quotation marks, the TI-84 Plus calculates and displays the

same initial list of answers, but does not attach the formula for future calculations.

Note:

Any user-created list name referenced in a formula must be preceded by an

symbol (Chapter 11).

Press

. The TI-84 Plus calculates each list element and stores it to the list

name to which the formula is attached. A lock symbol is displayed in the stat list
editor, next to the list name to which the formula is attached.

Summary of Contents for -84 Plus

























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for -84 Plus

Reviews:

Related manuals for -84 Plus

Brands by name

Popular brands

Texas Instruments -84 Plus, Manual Book

Search results

Summary of Contents for -84 Plus

Reviews:

Related manuals for -84 Plus

Brands by name

Popular brands