Texas Instruments -84 Plus, Manual Book

Page: 436 / 696

Chapter 16: Programming 433
Note:
To move the cursor to the beginning of a command line, press
y |
; to move to
the end, press
y ~
. To scroll the cursor down seven command lines, press
ƒ †
.
To scroll the cursor up seven command lines, press
ƒ }
.
Inserting and Deleting Command Lines Inserting and Deleting Command Lines Inserting and Deleting Command Lines Inserting and Deleting Command Lines
To insert a new command line anywhere in the program, place the cursor where you
want the new line, press
y 6
, and then press
Í
. A colon indicates a new line.
To delete a command line, place the cursor on the line, press
‘
to clear all
instructions and expressions on the line, and then press
{
to delete the command line,
including the colon.
Copying and Renaming Programs Copying and Renaming Programs Copying and Renaming Programs Copying and Renaming Programs
Copying and Renaming a Program Copying and Renaming a Program Copying and Renaming a Program Copying and Renaming a Program
To copy all command lines from one program into a new program, follow steps 1 through
5 for Creating a New Program, and then follow these steps.
1. Press
y K
.
Rcl
is displayed on the bottom line of the program editor in the new
program (Chapter 1).
2. Press
 |
to display the
PRGM EXEC
menu.
3. Select a name from the menu.
prgm name
is pasted to the bottom line of the program
editor.
4. Press
Í
. All command lines from the selected program are copied into the new
program.