Texas Instruments -84 Plus, Manual Book

Page: 217 / 696

Chapter 9: Split Screen 214
If stat plots are turned on, the plots are shown along with the x-y plots in graphs. Press
y 0
to make the table portion of the split screen active and to display the list data.
Press
†
or
}
to highlight a value you want to edit, and then enter a new value directly in
the table to overwrite the previous value. Press
~
repeatedly to display each column of
data (both table and list data).
Split-screen display with both x-y plots and stat plots
Some screens are never displayed as split screens. For example, if you press
z
in
Horiz
or
G-T
mode, the mode screen is displayed as a full screen. If you then press a key
that displays either half of a split screen, such as
r
, the split screen returns.
When you press a key or key combination in either
Horiz
or
G-T
mode, the cursor is
placed in the half of the display for which that key applies. For example, if you press
r
, the cursor is placed in the half in which the graph is displayed. If you press
y 0
, the cursor is placed in the half in which the table is displayed.
The TI-84 Plus will remain in split-screen mode until you change back to
Full
screen
mode.