Texas Instruments -84 Plus Manual Book Download Page 435

Page: 435 / 696

Chapter 16: Programming

432

The TI-84 Plus checks for errors during program execution. It does not check for errors
as you enter a program.

Breaking a Program

To stop program execution, press

. The

ERR:BREAK

menu is displayed.

•

To return to the home screen, select

1:Quit

•

To go where the interruption occurred, select

2:Goto

Editing Programs

Editing a Program

To edit a stored program, follow these steps.

Press



to display the

PRGM EDIT

menu.

Select a program name from the

PRGM EDIT

menu. Up to the first seven lines of the

program are displayed.

Note:

The program editor does not display a

to indicate that a program continues

beyond the screen.

Edit the program command lines.

•

Move the cursor to the appropriate location, and then delete, overwrite, or insert.

•

Press

‘

to clear all program commands on the command line (the leading

colon remains), and then enter a new program command.

Summary of Contents for -84 Plus

























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for -84 Plus

Reviews:

Related manuals for -84 Plus

Brands by name

Popular brands

Texas Instruments -84 Plus, Manual Book

Search results

Summary of Contents for -84 Plus

Reviews:

Related manuals for -84 Plus

Brands by name

Popular brands