8.1.4. Timer and clock settings
8.1.5. Setting button
17
1) Short press the button
and the working mode could be set.
•
AUTO mode. (Heat pump + E-heater will work according to the controller logic). The symbol
will appear on the display.
•
GREEN mode. (Only heat pump will work at normal working condition). The symbol will appear on the display.
•
BOOST mode (Heat pump + E-heater will work at the same time). The symbol
+ will appear on the display.
•
E-HEATER mode. (Only E-heater will work). The symbol will appear on the display.
•
VENTILATION mode. (Only fan will work). The symbol
will appear on the display.
2) Check the system parameters
•
In any status, press this button and hold for 3 seconds, entry the system parameter checking interface.
•
Press the and buttons to check the system parameters.
3) Adjust the system parameters. See 9.2. “Parameter list”
The parameters have been set; the user cannot change the parameters optionally. Please ask a qualified service
person to do this when required.
If no action is performed using the buttons for 10 seconds
, the controller will exit and save the setting automat-
ically.
Unlock the screen:
- Press the button for at least 3 sec. The buttons are unlocked and the symbol will appear. After 1 minute the buttons will lock
automatically.
Clock setting:
- After power on, short press
button to enter the clock setting interface, hour and minute icons “88:88” flash simultaneously.
- Short press
button to switch hour/minute setting, press the and buttons to set the exact hour(s) and minute(s);
- Press
button again to confirm the settings/changes and exit.
Timer setting:
1- After power on, long press button for 5 seconds to enter the timer setting interface, the timer on icon
ON
ON
ON
OF
OFFF
OFF
111
222
and hour icon “88:”
flash simultaneously;
2- Press the and buttons to set the exact hour(s).
3- Press
button to transfer to minute setting, minute icon “:88” flash, press the
and buttons to set the exact minute(s).
4- Press the button
to confirm. In this moment, timer on icon
ON
ON
ON
111
222
stops flashing that means “timer on” is set
IMPORTANT
: If step No4 is omitted, timer on icon
ON
ON
ON
111
222
will stay flashing and “timer on” is not set!
5- Press
button again to transfer to timer off setting, the “timer off” icon
OF
OFFF
OFF
111
222
and hour icon “88:” flash simultaneously.
6- Press the
and buttons to change the hour(s).
7- Press button to transfer to minute setting, minute icon “:88” flash, press the
and buttons to change the minute(s).
8- Press
button to confirm. In this moment, “timer off” icon
OF
OFFF
OFF
111
222
stops flashing that means “timer off” is set
IMPORTANT
: If step No8 is omitted, timer off icon
ON
ON
ON
111
222
will stay flashing and “timer off” is not set!
9- Press
button again to save and exit the timer setting interface.
IMPORTANT
:
- If step No4 is omitted and all steps from 5 to 9 are done, “timer off” will be set and in stand by mode icon
OF
OFFF
OFF
111
222
will light on display.
- If step No8 is omitted, and all steps from 1 to 4 are done, “timer on” will be set and in stand by mode icon
ON
ON
ON
111
222
will light on display.
- If all steps from 1 to 9 are done, both “timer on” and “timer off” will be set and icon
ON
ON
ON
OF
OFFF
OFF
111
222
will light on display.
Timer canceling:
Do all steps from 1 to 9, without steps No4 and No8. The timer will be canceled
NOTE: 1)
The timer settings are automatically repeating.
NOTE: 2)
The timer settings are still valid after a sudden power cut.
Summary of Contents for AquaThermica Compact HPWH 3.2 100
Page 2: ......
