NOTE:
If applicable, the passenger front
airbag can also be controlled by touching the
airbag's status icon located in the top corner
of the touchscreen.
Park Assist Chimes
: If on, an audible beep
sounds when approaching an object while
parking (see
Joe Mode
: When enabled, Joe Mode lowers
the volume of your vehicle's chimes, except
for turn signals.
Security Alarm
: Enable the security alarm
Passive Entry
: If on, doors automatically
unlock and door handles extend (if Auto-
Present Handles is on) whenever you
approach Model S carrying a key. If off, you
must use the key to unlock Model S. See
NOTE:
You must press the brake pedal to
power Model S on before you can change the
Passive Entry setting. See
NOTE:
If Passive Entry is off and you do not
press the brake pedal to start Model S within
approximately five minutes, a message
displays on the instrument panel and you
must use the key to lock, then unlock Model S
again before starting the vehicle.
NOTE:
When you enable passive entry, it is
recommended that you also enable
PIN to
Drive
to increase security (see
).
NOTE:
Depending on your region, Passive
Entry may be enabled or disabled by default.
Tilt/Intrusion
: If equipped, a siren can sounds
if Model S detects motion inside the cabin or
if the vehicle is moved or tilted (see
).
PIN to Drive
: Increase security by preventing
Model S from being driven until a 4-digit PIN
(Personal Identification Number) is entered
Cabin Overheat Protection
: Reduce the
temperature of the cabin in extremely hot
ambient conditions for a period of up to
twelve hours after you exit Model S (see
Cabin Overheat Protection on page 137
).
Operates only when the energy remaining in
the Battery is above 20%.
Allow Mobile Access
: Allow Tesla's mobile
applications to access your Model S (see
NOTE:
To disable Allow Mobile Access, enter
your Tesla account credentials on the
touchscreen.
DATA SHARING
: Allow sharing of road
measurement data (see
Service
Key Fob Update
: Your vehicle must be in Park
to update your key fob. See
for more information.
Reset TPMS Sensors
: Reset the TPMS sensors
after replacing a wheel (see
).
Wheel Configuration
: Update your vehicle's
wheel configuration if you are installing new
wheels or swapping them for different ones.
This also changes the wheels of your vehicle's
avatar on the touchscreen.
NOTE:
Changing your vehicle's wheel
configuration can impact range estimates, tire
pressure warning levels, and vehicle
visualization. See
for more information.
WARNING:
Only use Tesla-approved
wheels when installing or swapping
wheels. Using non Tesla-approved
wheels can cause serious damage.
Tesla is not liable for damage caused
by using wheels not approved by
Tesla.
Tow Mode
: Prepare Model S for towing by
keeping it in Neutral, which disengages the
parking brake. See
.
Wiper Service Mode
: Make wiper blades easy
to access (see
).
FACTORY RESET
: Erase all personal data
(saved addresses, music favorites, imported
contacts, etc.) and restore all customized
settings to their factory defaults (see
).
Controls
131
Using the Touchscreen