WARNING:
Model S is equipped with
high voltage components that may be
compromised as a result of a collision
(see
). Before transporting
Model S, it is important to assume
these components are energized.
Always follow high voltage safety
precautions (wearing personal
protection equipment, etc.) until
emergency response professionals
have evaluated the vehicle and can
accurately confirm that all high
voltage systems are no longer
energized. Failure to do so may result
in serious injury.
Disable the Self-Leveling Air
Suspension System
If Model S is equipped with the air suspension
system, it automatically self-levels, even when
power is off. To prevent damage, you must
activate Jack Mode to disable self-leveling:
1. Touch
Controls
>
Suspension
on the
touchscreen.
2. Press the brake pedal, then touch
Very
High
to maximize height.
3. Touch
Jack
.
When Jack Mode is active,
Model S displays this red
indicator light on the
instrument panel, along
with a message telling you
that active suspension is
disabled.
NOTE:
Jack Mode cancels when driving speed
exceeds 7 kph.
WARNING:
Failure to activate Jack
Mode on a vehicle equipped with the
air suspension system can result in the
vehicle becoming loose during
transport, which may cause significant
damage.
Activate Transport Mode
Transport Mode keeps the parking brake
disengaged while winching Model S onto a
flatbed truck. When active, Transport Mode
displays a message indicating that the vehicle
will remain free-rolling. The following are
required to enable Transport Mode:
• 12V power is required. You are unable to
use the touchscreen to activate Transport
Mode if Model S has no power.
• Model S must detect a key. Transport
Mode is available only when a key is
detected.
To activate Transport Mode:
1. Ensure the vehicle is in Park.
2. Chock the tires or otherwise ensure
Model S is secure.
3. Press and hold the brake pedal, then on
the touchscreen, touch
Controls
>
Service
>
Towing
. The touchscreen displays a
message reminding you how to properly
transport Model S.
4. Press and hold the
Transport Mode
button until it turns blue. Model S is now
free-rolling and can slowly be rolled (no
faster than walking speed) or winched.
To cancel Transport Mode, shift Model S into
Park.
NOTE:
If Model S loses 12V power after
Transport Mode is enabled, Transport Mode
will cancel and the parking brake will be re-
applied.
CAUTION:
If the electrical system is
not working, and you therefore cannot
use the touchscreen to activate
Transport Mode, use self-loading
dollies or tire skates. Before doing so,
always check the manufacturer's
specifications and recommended
loading capacity.
Pull onto the Flatbed Truck -
With Tow Eye
1. Locate the tow eye.
Instructions for Transporters
214
MODEL S OWNER'S MANUAL