8
9
Selecting type of meat
Repeatedly press the
button and select the required type
of meat in the top line of the display.
Doneness selection
Repeatedly press the
button and select the required degree of
doneness.
Note:
Degree of doneness can be selected only for beef,
lamb and pork.
Notice
The pre-set temperatures are indicated for meat baked as a whole.
For preparing small servings of meat, e.g. beef steaks, English roast
beef, chicken breasts, fi sh fi llets, cakes, etc., use the manual tem-
perature setting.
Manual temperature setting
To set temperature manually, repeatedly press the
button
until the top line of the display with the chosen type of meat and
degree of doneness disappears. Use the
button to increase or
decrease temperature
(SET TEMP)
to the required value; the digits
change faster when the button is held down.
Placing the probe in a food
Punch the heat-resistant probe into meat in its highest point so that
the tip of the probe is as close to the centre of the food as possible
and not near fat or bone.
Placing food with the probe into the oven
Place food into the oven so that the probe and the cord do not touch
the walls of the oven; place the cord loosely over the top of the door
and close the oven.
Placing the thermometer
Attach the thermometer to the outer metal surface of the oven or
near the oven using the magnets, or set it onto a fl at surface.
Warn-
ing! Never place the thermometer into the oven.
Measuring temperature inside food
The thermometer continuously shows temperature inside meat
while baking. As soon as the temperature inside the food reaches the
pre-set value, the audible indication is sounded. Finish baking and
turn off the audible indication by pressing any button.
Removing the probe from food
Remove the probe from the food and set it aside onto a heat-resistant
pad. Warning! Use an oven mitt or heatproof mat when removing the
stainless steel probe – both the probe and the cord will be hot.
Timer
Measuring the set time - countdown
Press to set hours, press to set minutes; the digits change faster
when the button is held down. Time in the range from
00:01:00
to
23:59:00
h
can be set in 1-minute increments.
Press the
button and the timer will start measuring the set time,
giving a sound indication lasting one minute when the set time in-
terval has expired. You can turn off the sound indication by pressing
any button.
Measuring time
Press
and the timer starts measuring time from
0:00:00
to
23:59:59 h
, giving a sound indication lasting one minute when the
set time interval has expired.
Pausing the timer
You can stop the timer and start it again at any time by pressing
.
Resetting the timer
Press the and buttons at the same time.
Selecting between °C/°F
Press
on the bottom of the thermometer. An will appear
on the display and the thermometer will measure temperature in
degrees Fahrenheit. When switched on again, the thermometer will
be set to measure in the units last used.
Switching off the thermometer
Switch the thermometer off after each use by holding down the
button.
