69
Push 2, displays the value of the
lower tolerance as also its position
on the analogue range (both tole-
rances are now displayed).
Push 3, measuring mode with
tolerance and classification of
measured values.
Push 4, switch instrument back to
standard measuring mode.
Tol
Tol
Tol
Tolerance setting
Touch-keys for tolerance setting
During this setting the LED’s are turned off
and the classification relays are open.
Memory Function (only for TT60)
The basic version of TT60 is delivered with memory functions and allows a large choice of
measurements.
– Maximum value memorisation: measurement of external diameter on parts by simply
sliding them beneath a probe.
– Minimum value memorisation: measurement of internal diameters by pivoting a two-
point internal measuring instrument around the culmination point.
– Difference memorisation: measurement of form and position errors (primarily eccentri-
city and end-face wobble).
– Mean value memorisation: obtaining the average of a number of values which may be
scattered, due to form errors for example.
The instrument is provided with 2 memories attached to the measurement function. One
for the maximum and the other for the minimum value.
Every push on the
key changes to the
next one of 4 memory functions
MEM
Push 1
Shows the memorised maximum value.
The singe
appears.
MEM
