PORTABLE PROGRAMMER
7
5- Connection for the keys
It is a cylinder plug where the keys are inserted to be recorded or read.
2.5
Storage Capacity
The Portable Programmer has a memory of
0,5MB
.
This is, however, a very relative data. The portable programmer receives information about the
doors forming part of a locking plan. That is, the users who will have access to them, the time
zones in which they will have access, the calendar of "public holidays" in the installation, etc.
Therefore the number of doors that we can transfer to the Portable Programmer will depend
above all on the number of users forming part of the installation.
The following table shows the number of doors to load on the Portable Programmer,
depending on the number of users per door:
Users/Doors
Doors to load on the PP
50
Up to 1000 doors approx.
100
Up to 500 doors approx.
200
Up to 250 doors approx.
500
Up to 100 doors approx.
The number of events that we can register from the doors also depends on the number of
events that we have stored on them. The cylinders and/or locks can store up to 1,000 events
(when the number of users does not exceed 1,000).
If the doors have stored the maximum number of events, we can register the events of a
maximum of 50 doors in the Portable Programmer.
