PORTABLE PROGRAMMER
11
The next time we press the
F1
function key, we will see the following illustration:
If we press “
Enter
” in this position, the light of the screen will switch off.
3.4.2
Date and Time
After selecting the option Date and Time, we press ENTER to access that function.
Thus we display the date and the time of the clock of the portable programmer. We cannot
modify it, because the programmer takes the computer’s date and time. When we send the
information of the locking plan from the computer to the portable programmer the date and time
of the computer are also transmitted.
Therefore, in order to modify the date and time of the portable programmer we must first modify
the time on the computer and then re-send the data to the portable programmer. This way, the
programmer will take the new date and time.
Press
ý
(F5) to accept and go back to the main screen of the Portable Programmer.
3.4.3
Language
By choosing Language in the configuration menu with the Up or Down cursor keys and
pressing ENTER we access the Language option of the portable programmer.
On that function we can display the language being used by the portable programmer. As the
Date and Time, the Programmer takes the Language from the computer that is transmitting the
data.
To accept and go back to the main menu of the Portable Programmer, press
ý
(F5).
