Termodinamik DEK 12, Installation And Usage Manual

Page: 7 / 32

H E A T I N G S Y S T E M S
4
2 GENERAL FEATURES
Your electrical boiler has been subjected to various safety tests during manufacturing
processes.
Your electrical boiler has been insulated all around with aluminum foiled fiberglass insulation
and energy losses have been minimized. Surface of internal sheet metal chassis parts are
protected with high quality primer paint, external surfaces are protected with electrostatic
epoxy-polyester powder paint against the corrosion.
Closed expansion tank is a standard item with your boiler. It maintains safety of your water
systems against the pressure variations.
When the user sees that the pressure drops below 1 bar, must interfere personally and fill
water into the system. Your boiler has a water pressure switch for safety to shut off the entire
system in case of water pressure drop to 0,6 bars (lack of water) to prevent parching of
resistances. (Boiler is now in off position and water must be added and on button must be
pressed to restart).
The water heated in your boiler passes through plat e heat exchanger before goes to
radiators and heats your domestic use water to provide you with hot water.
Your boiler has been checked at the factory and ready to run. Please read this user manual
first, before using your boiler and keep it at a safe place for later referral.
Your boiler will serve you for a long time with maximum efficiency as long as
recommendations here followed.
1. INTRODUCTION
FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS MANUAL MAY RESULT IN DEATH,
SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE. THOROUGHLY READ ALL
INSTRUCTIONS BEFORE YOU ATTEMPT TO INSTALL, OPERATE OR MAINTAIN THIS BOILER.