Part No. 57.4400.9203 GTH-4016SR • GTH-4018SR
73
March 2010
REV A
Section 5 • Settings
SETTINGS
45. By using PLUS (+) and MINUS (-)
pushbuttons, select “ZERO”
46. ENTER
47. By using PLUS (+) and MINUS (-)
pushbuttons, select “SAVE”
48. ENTER
49. By using PLUS (+) and MINUS (-)
pushbuttons, select “EXIT”
50. Check that the Machine Levelled Warning
Light is on.
51. CLOCK
52. ENTER
53. By using PLUS (+) and MINUS (-)
pushbuttons, select “MODIF”
54. ENTER
55. Blinking cursor pass to year field: by using
PLUS (+) and MINUS (-) pushbuttons set the
right year
56. ENTER
57. Blinking cursor pass to month field: by using
PLUS (+) and MINUS (-) pushbuttons set the
right month
58. ENTER
59. Blinking cursor pass to day field: by using
PLUS (+) and MINUS (-) pushbuttons set the
right day
60. By using PLUS (+) and MINUS (-)
pushbuttons, select “SAVE”
61. ENTER
62. By using PLUS (+) and MINUS (-)
pushbuttons, select “EXIT”
63. ENTER
64. By using ARROW UP or ARROW
DOWN pushbuttons, select “ENABLING
IMPLEMENTS”
65. ENTER
66. By using ARROW UP or ARROW DOWN
pushbuttons, select the attachment that have
to be modified
67. ENTER
68. By using PLUS (+) and MINUS (-)
pushbuttons, select “MODIF”
69. ENTER
70. By using PLUS (+) and MINUS (-)
pushbuttons, select “0” when the attachment is
not present, or select “1” when the attachment
is present
71. By using PLUS (+) and MINUS (-)
pushbuttons, select “SAVE”
72. ENTER
73. By using PLUS (+) and MINUS (-)
pushbuttons, select “EXIT”
74. ENTER
75. ESC
76. Turn off the engine and then start it again.
