March 2010
Section 3 • Scheduled Maintenance Procedures
14 GTH-4016SR • GTH-4018SR Part No. 57.4400.9203
Maintenance Symbols Legend
NOTICE
The following symbols have
been used in this manual to
help communicate the intent of
the instructions. When one or
more of the symbols appear at
the beginning of a maintenance
procedure, it conveys the meaning
below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required
to perform this procedure.
Indicates that a cold engine will be
required to perform this procedure.
Indicates that a warm engine will be
required to perform this procedure.
Indicates that dealer service will be
required to perform this procedure.
Pre-delivery Preparation Report
The pre-delivery preparation report contains
checklists for each type of scheduled inspection.
Make copies of the
Pre-delivery Preparation
report
to use for each inspection. Store completed forms
as required.
Maintenance Schedule
There are five types of maintenance inspections
that must be performed according to a schedule—
daily, quarterly, semi-annually, annually, and
two year. The
Scheduled Maintenance Procedures
Section and the Maintenance Inspection Report
have been divided into five subsections—A, B,
C, D, and E. Use the following chart to determine
which group(s) of procedures are required to
perform a scheduled inspection.
Inspection Checklist
Daily or every 8 hours
A
Quarterly or every 250 hours
A + B
Semi-annually or every 500 hours
A + B + C
Annually or every 1000 hours
A + B + C + D
Two year or every 2000 hours
A + B + C + D + E
Maintenance Inspection Report
The maintenance inspection report contains
checklists for each type of scheduled inspection.
Make copies of the
Maintenance Inspection Report
to use for each inspection. Store completed forms
for three years.
SCHEDULED MAINTENANCE PROCEDURES
