Terex Genie GS-3384, Service And Repair Manual

Page: 152 / 217

Service and Repair Manual June 2021
Deutz D 2.9 L4 Engine Fault Codes
138 GS ™ -84 • GS ™ -90 Part No. 1306587GT
SPN = Suspect Parameter Number
FMI = Failure Mode Identifier
KWP = Keyword Protocol
SPN FMI KWP Description
523922 7 1262 Burner Shut Off Valve; blocked
closed
523922 7 1264 Burner Shut Off Valve; blocked
closed
523929 0 109 Fuel Balance Control integrator
injector 1 (in firing order);
maximum value exceeded
523929 1 115 Fuel Balance Control integrator
injector 1 (in firing order);
minimum value exceeded
523930 0 110 Fuel Balance Control integrator
injector 2 (in firing order);
maximum value exceeded
523930 1 116 Fuel Balance Control integrator
injector 2 (in firing order);
minimum value exceeded
523931 0 111 Fuel Balance Control integrator
injector 3 (in firing order);
maximum value exceeded
523931 1 117 Fuel Balance Control integrator
injector 3 (in firing order);
minimum value exceeded
523932 0 112 Fuel Balance Control integrator
injector 4 (in firing order);
maximum value exceeded
523932 1 118 Fuel Balance Control integrator
injector 4 (in firing order);
minimum value exceeded
523935 12 168 Timeout Error of CAN-Transmit-
Frame EEC3VOL1; Engine send
messages
523936 12 169 Timeout Error of CAN-Transmit-
Frame EEC3VOL2; Engine send
messages
523946 0 1158 Zero fuel calibration injector 1 (in
firing order); maximum value
exceeded
SPN FMI KWP Description
523946 1 1164 Zero fuel calibration injector 1 (in
firing order); minimum value
exceeded
523947 0 1159 Zerofuel calibration injector 2 (in
firing order); maximum value
exceeded
523947 1 1165 Zerofuel calibration injector 2 (in
firing order); minimum value
exceeded
523948 0 1160 Zerofuel calibration injector 3 (in
firing order); maximum value
exceeded
523948 1 1166 Zerofuel calibration injector 3 (in
firing order); minimum value
exceeded
523949 0 1161 Zerofuel calibration injector 4 (in
firing order); maximum value
exceeded
523949 1 1167 Zerofuel calibration injector 4 (in
firing order); minimum value
exceeded
523960 0 1011 Physical range check high for
EGR cooler downstream temp.
523960 0 1458 High exhaust gas temperature
EGR cooler downstream;
warning threshold exceeded
523960 1 1012 Physical range check low for
EGR cooler downstream temp.
523960 1 1459 High exhaust gas temperature
EGR cooler downstream; shut
off threshold exceeded
523980 14 1187 Bad quality of reduction agent
detected
523981 11 918 Urea-tank without heating
function (heating phase)
523982 0 360 Powerstage diagnosis disabled;
high battery voltage
523982 1 361 Powerstage diagnosis disabled;
low battery voltage