56
3.2 Serial Connection
Another possibility to connect with the encoder is with a serial connection. Therefore you
need the ENC-100 com-cable (ENC-100-COMCAB). The com-cable is an optional ENC
accessory, and needs to be ordered separately.
For more information contact:
The pin assignment for the RJ45 female COM-port interface of the ENC-100 is:
Pin 1: not connected
Pin 2: DTR (Data Terminal Ready)
Pin 3: TxD (Transmit Data)
Pin 4: GND (Ground)
Pin 5: GND (Ground)
Pin 6: RxD (Receive Data)
Pin 7: DSR (Data Set Ready)
Pin 8: not connected
The ENC-100-COMCAB cable assignment for a connection between a computer and the
ENC-100 is:
D-Sub 9 Pin connector
RJ 45 connector
Pin 2
Pin 3
Pin 3
Pin 6
Pin 5
Pin 5
Connect your ENC-100 via the ENC-100-COMCAB to the serial port of your computer.
Open the Hyper Terminal application. Hyper Terminal is a communication software which is
included with Microsoft Windows. To run Hyper Terminal click Start/Accessories. Within
accessories double click Hyper Terminal (If you do not see Hyper Terminal click the
communications folder and then click Hyper Terminal).
Is connected with
Is connected with
Is connected with
