Teracue ENC-100 MPEG-2 Encoder, User Manual

Page: 53 / 69

53
For starting a telnet session type: telnet <ip telnet <ip telnet <ip telnet <ip- - - -address>, address>, address>, address>, e.g. telnet 172.16.20.100
The IP address should correspond to the ENC's IP address.
This will open the following dialog.
Enter your
Login Name
and
Password.
The same
password
as when
logging in
via browser
(admin/
admin)
After login: The command “help” will display a list of all available options.
The “ls” “ls” “ls” “ls” command allows you to see the available directories and options in the current
directory.
To change the current directory, write “cd
“cd “cd
“cd directory_name”””” e.g. “cd status”
If you want to enter the value of an option you must use the "put put put put"""" command followed by the
correct values. Afterwards use the """"apply
apply apply
apply"""" and "save"
"save" "save"
"save" commands to apply and/or save your
changes.
.!.
.!. .!.
.!. Example
Example Example
Example
E.g. for changing the hostname, you need to type the following:
- put configuration/network/hostname teraedge
- apply configuration/network/hostname
- save
-reset
.!.
.!. .!.
.!. The following 2 pages provide an overview over the Telnet navigational and directory
The following 2 pages provide an overview over the Telnet navigational and directory The following 2 pages provide an overview over the Telnet navigational and directory
The following 2 pages provide an overview over the Telnet navigational and directory
structure. This overview is useful to find the co structure. This overview is useful to find the co structure. This overview is useful to find the co structure. This overview is useful to find the correct configuration settings when navigati rrect configuration settings when navigati rrect configuration settings when navigati rrect configuration settings when navigating ng ng ng
in Telnet mode. in Telnet mode. in Telnet mode. in Telnet mode. For instructions and descriptions on the individual settings, please see the For instructions and descriptions on the individual settings, please see the For instructions and descriptions on the individual settings, please see the For instructions and descriptions on the individual settings, please see the
corresponding chapters for web based configuration.
corresponding chapters for web based configuration. corresponding chapters for web based configuration.
corresponding chapters for web based configuration.