Teracue ENC-100 MPEG-2 Encoder User Manual Download Page 48

Page: 48 / 69

2.4.11.2

Menu: S

YSTEM

PDATE

(upgrading firmware version)

Teracue's goal is customer satisfaction and constant product improvement.

Please check regularly to see if the most recent firmware version is installed on your

ENC-100. Please visit the IPTV Support Area on:

www.teracue.com

To install a new firmware on the encoder, you need the following file:

Firmware Update for ENC

Firmware Update for ENC-

-100 V

100 V

100 V3.03

3.03

Firmware versions can be downloaded from the Teracue support website listed above.

Download the correct firmware version that you wish to update your encoders with and save

it locally on your computer. The firmware version file e.g. for version 3.03 Y/C, S-Video is

called: "enc

enc

enc100_v3.03

100_v3.03

100_v3.03_yc

_yc

_yc"

Open the configuration webpage of the ENC-100 and select the submenu

UPDATE

within the

menu S

YSTEM

Click on the

BROWSE

button to locate

the file on your

local hard drive.

Hit

and the path

to the file will be

listed in the box in

the middle of the

screen.

To start the firmware update procedure simply click on the

SEND

button.

.!.

The

The update won’t change your current settings

update won’t change your current settings

.!.

The update process will take

The update process will take approximately

approximately

approximately 2 minutes.

2 minutes.

.!.

During this time do not disconnect the encoder from the network or the power.

.!.

Doing

Doing so will harm your

so will harm your

so will harm your encoder!

encoder!

.!.

Trying to connect to the encode

Trying to connect to the encoder or navigating on the configuration webpages during

r or navigating on the configuration webpages during

.!.

the updating process can also harm your encoder.

Summary of Contents for ENC-100 MPEG-2 Encoder






































































Search results

Summary of Contents for ENC-100 MPEG-2 Encoder

Reviews:

Brands by name

Popular brands

Teracue ENC-100 MPEG-2 Encoder, User Manual

Search results

Summary of Contents for ENC-100 MPEG-2 Encoder

Reviews:

Brands by name

Popular brands