34
.!.
.!.
.!.
.!.
When the IP
When the IP
When the IP
When the IP-
-
-
-address has been changed, the encoder needs to be reset (reboot), in
address has been changed, the encoder needs to be reset (reboot), in
address has been changed, the encoder needs to be reset (reboot), in
address has been changed, the encoder needs to be reset (reboot), in
order for the new IP
order for the new IP
order for the new IP
order for the new IP-
-
-
-address to take effect.
address to take effect.
address to take effect.
address to take effect.
When changing the IP-address please type in the new IP-address, Subnet Mask,
Gateway-Address and Host Name. Then hit the S
AVE BUTTON
and then the R
EBOOT
BUTTON
.
Network Settings
Network Settings
Network Settings
Network Settings
DHCP:
Select this option to enable DHCP. Only use this option if you are
familiar with DCHP and your network supports this.
Hostname:
Enter a hostname for ENC-100 blade.
IP Address:
The IP Address is an identifier for your ENC in the TCP/IP network.
Networks use the TCP/IP protocol route messages based on the IP
address of the destination. The Format of an IP address is a 32-bit
numeric address written as four numbers separated by periods. Each
number can range from 0 to 255.
e.g. 172.16.20.100
Subnet Mask:
A Subnet Mask is a 32-bitmask used to divide an IP address into
subnet and specify the networks available hosts.
e.g. 255.255.0.0 is the netmask for a class C IP address like
172.16.20.100
Gateway:
The gateway is commonly the address of the network device such as a
network router.
