TCG120-4_R1.3
–
May 2022
Page 12
7.1.3.
Analog inputs section
Analog inputs can be used for monitoring DC voltage sources
–
analog sensors, batteries, power
supplies, solar panels, etc.
Analog inputs are sampled faster, but the new actual value is changed in 0.5 seconds. All 250
readings between the value changes are averaged.
For every analog input “Unit”, “Multiplier” and “Offset” can be set in
the
“Setup
-
> Input/Output”
section.
7.1.4.
Relay section
The section displays the current state of relays. Each relay can be activated either remotely or
locally from the status of a monitored parameter. For locally activated relays a text describing
the controlling parameter is displayed rather than buttons.
Pulse duration and parameters for local relay activation can be set separately for each relay in
“Setup
->Input/Output->Relay o
utputs”.
7.2.
Setup
7.2.1.
SMS
SMS alarm recipients can be set in this section.
The “Master” has special rights to change the device settings using SMS commands.
By default,
this number receives SMS alarm messages. This can be changed by deactivation the alarm
notification checkbox.
“
Master
”
will receive SMS for loss of
internet connectivity if checkbox “Connectivity alert” is
activated. This checkbox is activated by default.
Summary of Contents for TCG120-4
Page 1: ......
Page 46: ...TCG120 4_R1 3 May 2022 Page 46 Appendix C Fig 1 Fig 2...
