Teracom TCG120-4, User Manual

Page: 18 / 46

TCG120-4_R1.3 – May 2022 Page 18
The “Max” value is set far enough from the wanted temperature to avoid trigger/alert
conditions around it.
For every sensor or analog input, there are 4 independent ways of alert when there is an
alarm condition
– email, SMS, post (HTTP Post with XML/JSON file) and MQTT publish. Each
alarm notification method is activated by a checkbox.
Globally for all sensors and for all analog inputs, there is a checkbox “Return notification”. If
this option is chosen there will be a notification also when the parameter returns in range.
Globally for all sensors and for all analog inputs, there is a “Notification delay” p arameter. It is
very useful as a filter for short alarm conditions.
7.2.4.2. Digital inputs
For every digital input, the alarm state should be chosen. The texts are already set on the
“Input/output” page .
When the input goes in alarm state 4 independent way of the alert are possible – email, SMS,
post (HTTP Post with XML/JSON file) and MQTT publish. Each alarm notification method is
activated by a checkbox.
Globally for all digital inputs, there is a checkbox “Return notification”. If this option is chosen
there will be a notification also when the parameter returns in range.
Globally for all digital inputs , there is a “Notification delay” parameter. It is useful as a filter for
short alarm conditions.