TCG120-4_R1.3
–
May 2022
Page 11
7.1.
Monitoring page
The monitoring page displays the current inputs/outputs status of TCG120-4
.
The page has 4
sections
–
“
1-Wire s
ensors”, “Analog inputs”
,
“Digital inputs”
and
“Relays”.
For every parameter (sensor, input, relay) there is a description of up to 15 characters. The
descriptions can be changed on the
“Setup
-
Input/Output”
page.
7.1.1.
Sensors section
TCG120-4 supports up to four sensors.
All detected 1-Wire sensors are shown in the
“1
-
Wire sensors” section. The sensors should be set
up in section “1
-
Wire sensors setup” on the Setup
->Sensors page.
For every sensor, there is a description, value, and ID information. The description length is up to
15 characters. The descriptions can be changed on the Setup->Conditions page.
Teracom temperature sensors readings are shown in the Value 1 column. TSH2xx temperature-
humidity sensors have the 2nd parameter shown on the Value 2 column.
7.1.2.
Digital inputs section
Digital inputs can be used for monitoring the state of discrete devices
–
motion sensor, door
contact, relay contact, alarm output, etc.
Digital inputs are sampled every 10ms. The change of input status is considered valid if the same
value is read in 3 consecutive samples (30ms).
The status of every input is shown by text and by color.
The descriptions and status texts
can be changed in “Setup
-
Input/Output”.
Summary of Contents for TCG120-4
Page 1: ......
Page 46: ...TCG120 4_R1 3 May 2022 Page 46 Appendix C Fig 1 Fig 2...
