TCG120-4_R1.3
–
May 2022
Page 20
7.2.5.2.
Data connection setup
This setting can be different for each mobile operator. By default, APN (Access Point Name) is
“internet”. Some mobile operator
s may require also a username and password.
7.2.5.3.
Mobile network connection reset
For areas with low signal strength or where the mobile network frequently drops/blocks,
automatic restarting of the network connection can be used. This could prevent permanently
losing the connection with the device.
The automatic restart will be done once per day.
By default, the automatic restart is disabled.
7.2.5.4.
General setup
The section is for some general settings.
The temperature and pressure units can be changed with preferable ones.
Writing mode change the alignment in the WEB interface and SMS.
Hostname, System name, System location and System contact are sent in XML/JSON files and
can be used for flexible identification of the device. These parameters can be also included in
the body of the e-mails.
The checkboxes on the right define what to see on the “Monitoring page”. By default
, they all
are enabled.
Summary of Contents for TCG120-4
Page 1: ......
Page 46: ...TCG120 4_R1 3 May 2022 Page 46 Appendix C Fig 1 Fig 2...
