i410/i1010
AC/DC Current Clamp
8
Reassembling the Current Clamp
After you have completed the last calibration step and checked the AC Amps function, do the following:
1.
Replace the decal over the potentiometer access holes.
2.
Replace the battery cover and its securing screw.
The Current Clamp is now ready for normal operation.
Replacement Parts
Replacement parts are listed in Table 5 and shown in Figure 3. To obtain replacement parts, call Fluke
Corporation at 1-800-526-4731.
Table 5. Replacement Parts
Part Description
Part No.
i410 Case Top Decal
642584
i1010 Case Top Decal
642592
Battery Door
642600
Top Case and Zero Knob
642618
PCB Assembly
642626
Case Screw
642634
Jaw Spring
642642
Bottom Case
642645
Brass Cable Clamp
642659
Power On/Off Button (green)
642675
Output Cable Assembly
642683
Jaw Assembly
603602
Poron Ring
642535
