Motivity v1.3
Technical Documentation
Installation
Risk of electrocution
Only skilled electricians can carry out installation and commissioning of
the device. Otherwise, there is a risk of fire and electrocution. Observe
the regulations valid in the country of use, as well as the KNX guidelines.
To be installed indoors.
1. Remove power from the KNX bus.
2. Connect the bus coupler with the KNX bus using the KNX bus connection terminal.
Connect the red bus wire to the red terminal (+) and the black bus wire to the black
terminal (–).
3. The bus coupler fits in a standard size 60-installation box .Use two screws to fix the bus
coupler. Make sure the mounting is level and that the “TOP ” marking on the PCB
↑
points upwards.
4. Plug the front onto the bus coupler. Make sure that the “TOP ” marking on the PCB
↑
(backside of the front) points upwards.
5. Power the KNX bus.
©
Tense BVBA
15/03/17
4
