Motivity v1.3
Technical Documentation
Thermostat
You can use a built-in thermostat to control the climate of your room. Heating, Cooling,
H Cooling with manual or automatic switch is supported. If a wait time is specified,
then the thermostat will wait that period after a switch occurred before controlling the
heating/cooling.
The status of heating/cooling can be monitored by the heating/cooling mode feedback, or by
the corresponding bits in the RHCC Status Feedback object
.
The method for controling the climate can be 2-Step switching , PI continuous or PI switching.
When switching is selected, an output object Heating (or Cooling) switch will appear. In the
other case, a Heating (or Cooling) value will make you able to control your heating/cooling
equipment.
4 Modes are supported :
•
Comfort
•
Standby
•
Night
•
Building Protection (a.k.a. Heat/Frost Protection)
The modes can be set over the HVAC object (DPT 20.102) , or over the corresponding 1 Bit
object. The Presence or Window open object can also alter the current mode.
For a schematic overview of how the current HVAC mode is determined, see below.
©
Tense BVBA
15/03/17
14
