Tennant sentinel, Service Manual

Page: 19 / 276

19
Sentinel 9018524 (05-2019)
GENERAL INFORMATION
TILTING THE CAB
TILTING THE CAB MANUALLY
The cab can be manually tilted forward to access
components under the cab.
CAUTION: Do not attempt to tilt the cab without
the use of an overhead motorized trolly hoist.
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, set parking
brake, turn off machine, and remove key.
1. Secure or remove all loose items from inside
the cab.
2. Disconnect both door springs from the back of
the cab. The springs can remain attached to
the engine access doors.
3. Pinch the windshield wiper hose with a small
cable tie or clamp.
4. Remove the plug covering the access hole and
remove the hardware securing the rear corners
of the cab to the frame of the machine.
5. Attach a chain from the overhead hoist to the
hook on the top rear part of the cab. Tilt the
cab far enough to engage the cab support bar.
6. Align the lower hole of the support bar with the
machine frame, then install the pin into lower
hole to engage the cab support bar.
WARNING: Raised cab may fall. Engage
cab support bar.
7. Keep the chain from the overhead hoist
attached for added support.
8. To lower the cab, disengage the cab support
and use the hoist to lower the cab.