SUPERVISOR CONTROLS
56
Tennant T300e/T300 (03- 2015)
9. Now at machine start up, a login screen will display
(Figure 152). The new user will need to enter their
assigned login number to operate machine
FIG. 152
10. When the user is done operating the machine, it is
recommended to have the user log out by pressing
the Settings button, then pressing the logout button
(Figure 153). Turning the key to the off position is
another way to also logout.
FIG. 153
11. Use the edit, copy and delete profile buttons to
manage the current user profiles (Figure 154).
For example, to edit any user profile settings
including the factory-assigned default supervisor
login number, press the “Edit Profile” button
FIG. 154
To change the factory-assigned default supervisor
login number, press the Supervisor button. Then
press the “DEFAULT SUPER” profile button to
enter the profile settings (Figure 155 ).
FIG. 155
Within the profile settings screen, press the
factory-assigned login number and enter a new
login number (Figure 156).
Press the blinking save icon to save the new
login number.
FIG. 156
13. To setup the machine without a login number
requirement for a specific user profile as the
default, follow the instructions below:
a.
Press the “Disable Login” button
(Figure 157).
FIG. 157
